Sealey VS2048 Uživatelský manuál stáhnout pdf (Strana 1)

INSTRUCTIONS FOR:

DIESEL INJECTION LEAK BACK KITS

MODEL No's:

VS2046.V2, VS2047.V2,

VS2048.V3

 WARNING! Ensure all Health and Safety, local authority, and general

workshop practice regulations are strictly adhered to when using this kit.

 Maintain tools in a good clean condition for the best and safest performance,

 DO NOT use test kit if parts are damaged.

 Wear approved eye protection. A full range of personal safety equipment is

available from your Sealey dealer.

 Wear suitable clothing to avoid snagging. Do not wear jewellery and tie back

long hair.

 WARNING! In a vehicle fitted with automatic transmission, select neutral or park.

 Use proper ventilation and avoid breathing in exhaust fumes.

 Keep a fire extinguisher to hand.

 Protect hands from burns, as the engine will be hot after the test.

 Account for all tools and parts being used, and do not leave them in, or on

the engine after use.

 Ensure that any collected diesel is disposed of correctly, in accordance with

local authority guidelines.

 DO NOT leave vehicle's engine running unattended whilst the testing kit is fitted.

IMPORTANT: Always refer to the vehicle manufacturer’s service instructions, or

a proprietary manual to establish the current procedure and data.

These instructions for use are provided as a guide only.

Designed to measure return fuel ow on diesel vehicles up to 6 cylinders, tted with common rail injection system. Identies worn, blocked or

inoperative injectors quickly and easily. Contains measurement tubes for short term tests and measurement bottles for long term, more accurate

evaluation. Master kit includes range of adaptors to suit Bosch, Delphi, New Delphi (VS2048 only) and Denso injectors for comprehensive coverage

of common rail diesel vehicles.

3.1. Most modern diesel vehicles are tted with a sound deadening cowling over the top of the engine. If tted, remove this cowling to gain

access to the engine.

3.2. Direct Connection Tubes (Bosch connectors only - see g.1.5).

These tubes are ideal for a vehicle which will not start, and provide a very quick assessment.

3.2.1. The return pipes are retained by wire clips, remove the clips and store in a safe place. Gently ease out each of the return pipes from the

injectors (g.2). Take care not to break the connectors as they can be brittle.

3.2.2. Plug the ends of the return pipes to avoid any spillage.

3.2.3. Connect the tubes to each injector (g.3), the wire clips are not required as the return system is low pressure.

3.2.4. Crank over the engine until the tubes are at least 50% full. Take care, that should the engine start, the tubes will ll up very quickly.

3.2.5. Check the levels for each injector. The overall variation in the levels should be less than 10%. Any injector which has a back leakage problem

will have more diesel in the tube.

3.2.6. Remove the tubes from the injectors, taking care not to spill any diesel, place a nger over the end of the tube to hold the liquid in the tube

and then empty into a suitable container.

3.2.7. Ret the return pipes to the injectors and secure them with the wire clips as per the vehicle manufacturer's workshop manual.

VS2048.V3

VS2047.V2

VS2046.V2

Original Language Version

VS2046.V2, VS2047.V2, VS2048.V3 Issue: 2(P) - 04/06/14

IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE

PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL

INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,

and properly maintained, give you years of trouble free performance.

1. SAFETY

2. INTRODUCTION

3. OPERATION

1 2

VS2048.V3 1
4. PARTS 2

Shrnutí obsahu

Strany 1 - VS2048.V3

INSTRUCTIONS FOR: DIESEL INJECTION LEAK BACK KITSMODEL No's: VS2046.V2, VS2047.V2,

Strany 2 - 4. PARTS

g.1g.3g.2Return PipeMeasurement Tube or Flexible PipeVS2046.V2, VS2047.V2, VS2048.V3 Issue: 2(P) - 04/06/14Part Part No. Description1 VS20

Komentáře k této Příručce

Žádné komentáře

Sealey VS2048 Uživatelský manuál Strana 1

Procházejte online nebo si stáhněte Uživatelský manuál pro Nástroje Sealey VS2048. Sealey VS2048 User Manual Uživatelská příručka

Shrnutí obsahu

Komentáře k této Příručce

Sealey VS2048 Uživatelský manuál Strana 1

Procházejte online nebo si stáhněte Uživatelský manuál pro Nástroje Sealey VS2048. Sealey VS2048 User Manual Uživatelská příručka

Shrnutí obsahu

Komentáře k této Příručce

Související produkty a manuály pro Nástroje Sealey VS2048