Sealey VSE4783 Uživatelský manuál stáhnout pdf (Strana 2)

3.2. Installing new bush.

3.2.1. Before installing a new bush, clean the inside of the front

control arm housing. Prior to installing the new bush, ensure

that the small arrow embossed on the bush aligns with the

 frontcontrolarminthepositionshowning.3.Thiswillensure 

 correctalignmentofthewish-boneonretting.

3.2.2. Assembletheinstallation(silver)setonthehousingasing.4. 

Adaptor (D) is threaded onto the short threaded end of the force

screw (F) with the ridged side facing inwards. Pass the force

screw (F) through the bush, through the front control arm

housing and position the Adaptor (E) over the force screw (F),

 ttingitagainstthefrontcontrolarmhousing.Fitthebearing(H) 

over the force screw (F), thread on the nut (G) and wind it up

to the adaptor (E). Double check to make sure that everything

is aligned and that the bush is sitting squarely against the front

control arm housing.

3.2.3. Usinga24mmdeepsocketorspanner,turnthenut(G)

clockwise. The bush will start to be pulled into the housing.

NOTE! If any undue resistance is felt, remove the assembly and

check that everything is correctly aligned.

3.2.4. Continue to turn the nut (G) to install the bush, when the bush

 reachestheadaptor(E),thebushisfullyinstalled(Fig.5).

3.2.5. Disassemble the tool, clean and lubricate before returning the

parts to the storage case.

3.2.6. Re-tthewish-boneasperthe vehicle manufacturer’s service

instructions or a proprietary manual.

NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.

IMPORTANT: No liability is accepted for incorrect use of this product.

WARRANTY: Guaranteeis12monthsfrompurchasedate,proofofwhichwillberequiredforanyclaim.

INFORMATION:Foracopyofourlatestcatalogueandpromotionscalluson01284757525andleaveyourfullnameandaddress,includingpostcode.

Sole UK Distributor, Sealey Group,

Kempson Way, Suffolk Business Park,

Bury St. Edmunds, Suffolk,

IP327AR

Original Language Version

VSE4783Issue:2-23/08/11

01284 757500

01284 703534

sales@sealey.co.uk

www.sealey.co.uk

Web

g.1

g.3

g.4

g.5

g.2

1 2

Komentáře k této Příručce

Žádné komentáře

Sealey VSE4783 Uživatelský manuál Strana 2

Komentáře k této Příručce

Související produkty a manuály pro Nástroje Sealey VSE4783