Sealey VS8622 Uživatelský manuál stáhnout pdf (Strana 14)

1) To close the brake pads after finishing the maintenance/service

work on the brakes, use UP/DOWN button to select Activate

Brake from Select Function menu and press Y button.

2) Wait a few minutes while the device is activating the brakes.

When they are activated successfully, following screen shows:

Note: It is necessary to do the adaptation only when brake pads have

been changed. So if you did not change them, please use UP/DOWN

button to select NO to exit.

…………… Activate Brake …….. .

Activation Done!

Go to Adaptation?

YES NO

........ Select Function ...... ...

4/5

1) Read Codes

2) Erase Codes

3) Deactivate Brake

►4) Activate Brake

 If you use the device to work on Audi A6 and VW Passat,

following screen shows after the activation is completed:

…………… Activate Brake .

Activation Done!

Press any key to con.

 If the tool fails to open the brake pads, an “Activation

Failed! Please try again!” message comes up.

- Verify that the ignition is ON;

VS8622_1.03_12/03/09

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 35 36

Žádné komentáře

Sealey VS8622 Uživatelský manuál Strana 14